Remote-audio RM Manuel d'utilisateur télécharger pdf

The newest version of the RM Remote Meter adds functionality

not found on the previous version, including a simplified

ON/OFF toggle control, "Low Battery" warning, and an attached

cable. This new version is easily identified by its Orange on

Black color scheme, as opposed to the previous version's Blue

color.

Connecting the RM

The RM utilizes a six pin Lemo-style circular connector that

allows it to interface with Remote Audio's BDSv3, HOT STRIP,

MEONv2, and SHUNT BOX. The Lemo-style connector is of the

push-pull locking type, and is keyed so it can only be inserted

one way. DO NOT attempt to disconnect the cable by twisting

or un-screwing; doing so will damage the connectors.

Low Battery Indicator

The illuminated toggle switch is a bi-color type that indicates

when your power source (typically a battery) falls below a

certain voltage level. This threshold voltage is selectable via a

switch inside the RM (fig 1).

When the battery voltage falls below the selected threshold, the

illuminated toggle will switch from Green to Red. Battery

voltage is influenced by the current draw of connected devices,

so some experimentation may be needed to find the correct

threshold for your setup.

To open the RM, remove the two phillips-head screws in the

back panel and separate the two halves of the shell. There will

be about four inches of cable looped inside, allowing for access

to the threshold switch (fig 2).

Using the RM

With the BDSv3 or SHUNT BOX:

With the RM connected, and the BDSv3 or SHUNT BOX toggle

switch is in the OFF position, the RM controls the on/off circuit

of the connected device. This allows the device to be placed

deep in the bag or cart, out of the way. To turn the BDSv3 or

SHUNT BOX on or off with the RM, flip the RM's toggle to the

"ON" position. When on, the RM will display the voltage of the

power source, and the toggle switch will illuminate (green or

red, depending on voltage). Pressing the lower button (labeled

"AMPS") will display the current draw of the devices being

powered for as long as the AMPS button is pressed. If the

BDSv3 or SHUNT BOX toggle switch is in the on position, the

RM will not turn off the device. In this case, the on-off function

of the RMv2 will only turn on and off the meter display.

With the HOT STRIP and MEONv2:

Flipping the toggle on the RM will turn the connected device

(HOT STRIP or MEONv2) on, and cause the associated LED

on the device to illuminate. This indicates that the RM is now

the "master", and powering ON and OFF can only occur

through the use of the RM's ON/OFF switch. When on, the RM

will display the voltage of the power source. Pressing the lower

button (labeled "AMPS") will display the current draw of the

devices being powered for as long as the AMPS button is

pressed.

Mounting Clip

The RM comes with a stainless steel clip to aid in securing the

box to a bag or strap. Additional holes on the box are available

for positioning the clip in various directions. Velcro

strips are

also included for situations where the clip is not desired. NOTE:

Keep the original clip screws. Attaching the clip with

screws longer than those originally supplied can damage

the RM and void the warranty.

Repairs

Items needing repair may be sent directly to:

Remote Audio Products

220 Great Circle Road, Suite 114

Nashville, TN 37228

Prior to returning any items, contact Remote Audio for an RA#

(return authorization number) at 615-256-3513, or

[email protected]

Limited Warranty

Remote Audio warrants the RM against defects in materials and

workmanship for a period of one (1) year from the date of original retail

purchase. Remote Audio will repair or replace qualifying products at its

discretion at no charge. Please visit our website for complete terms and

conditions or contact us at [email protected].

Actual Size

Specifications:

Connector Type:  Lemo-style 6-pin

Cable Length:  24 inches

Voltage Requirements:  9 - 20 VDC

Current Draw:   ~20 mA

Dimensions:   1" x 1.3" x 2.4"

Rev 02/01/2012

Remote Meter

220 Great Circle Road, Suite 114, Nashville, TN 37228-1737

Phone: 615.256.3513 | Fax: 615.259.2699

www.remoteaudio.com

REMOTE AUDIO

Three voltages are available for

use with the most common

battery chemistries:

13V - for Lithium-Ion

11.5V - for Nickel-Metal Hydride*

11V - for Lead Acid ("Gel Cells")



(* - Default Factory Setting)

fig 1

fig 2

REMOTE AUDIO 1

Résumé du contenu

Page 1 - REMOTE AUDIO

The newest version of the RM Remote Meter adds functionality not found on the previous version, including a simplified ON/OFF toggle control,

Commentaires sur ces manuels

Pas de commentaire

Remote-audio RM Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires audio Remote-audio RM. Remote Audio RM User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires audio Remote-audio RM